• 5.png
  • 3.png
  • 1.png
  • 2.png
  • 4.png
  • 6.png
◆ Services · Design packages

Design and engineering packages: from first idea to inspection

An adventure park, a resort attraction or a single zipline starts with the same question: does it work on this site, for these visitors, at this budget? Our design packages answer that question step by step. Each package is a paid assignment with a fixed fee and a defined result, so you know what you get before you commit to the next step.

Short answerThere are two tracks. Parks and resorts start with a Pre-Feasibility Site Consultancy, followed by master plan and concept, engineering and certification support. A single zipline starts with a zipline feasibility study, followed by concept, engineering and certification support. Every package has a fixed fee, quoted per project.
Feasibility studyFixed feeParks, resorts & ziplines
Master plan drawing of an adventure park with attractions, paths and water
Track 1 · Parks and resorts

Adventure parks and resorts: from site to inspection

For a park, the first question is not which attraction, but what the site can carry. The Pre-Feasibility Site Consultancy answers that before you spend money on design.

1 Pre-feasibility
2 Master plan
3 Engineering
4 Certification
Stage 2

Pre-Feasibility Site Consultancy

Lead time: Agreed per project, starting with a site visit
Fee: fixed, quoted per project
For whom
Owners, landowners and investors with a site and an idea for a park or resort, before money goes into design.
You receive
Site visit and terrain assessment: which part of the site can really be built on. Attraction mix and capacity checked against your visitor targets, from arrival and parking to each attraction. Phasing outline and indicative investment and return, calculated on your own assumptions. A written report with a clear finding: proceed, proceed with conditions, or stop. The scope follows your project: from a short site scan for one location to a full report with a live financial model for a multi-phase destination.
We need
Site location and plan, ownership and boundaries, visitor and price assumptions, any existing plans or permits.
Stage 3 · Module 3A

Master Plan & Concept Design

Lead time: Agreed per project
Fee: fixed, quoted per project
For whom
Parks and resorts with several attractions, often built in phases.
You receive
Site-wide layout, zoning, visitor flow and phasing, a design language that later phases follow, and concept design for the first phase.
We need
Pre-feasibility outcome, site survey, visitor targets, budget range.
Stage 3 · Module 3B

Product Engineering & Construction Book

Lead time: About 8–12 weeks per product
Fee: fixed, quoted per project
For whom
Approved concepts that are ready to be built.
You receive
Per attraction: calculations to the Eurocodes, design to EN 15567 where it applies, construction drawings, hardware list and Construction Book.
We need
Approved master plan or concept and geotechnical data.
Stage 4

Certification Support

Lead time: Alongside Module 3B
Fee: fixed, quoted per project
For whom
Every park that needs an independent inspection before opening.
You receive
Coordination with TÜV or your national inspection body and the technical file.
We need
Name of your inspection body and local requirements.

Start with your project details: submit your park or resort project. The full 7-stage process is on Build Your Park; concept work, master planning and product engineering are explained on Concept & Theme, Master Planning and Design & Architecture.

Track 2 · Ziplines

Ziplines: from line profile to inspection

For a single zipline, the first question is whether the line works: speed, braking distance and forces for every rider weight.

1 Feasibility
2 Concept
3 Engineering
4 Certification
Stage 2

Zipline Feasibility Study

Lead time: 5–10 working days after order and site data
Fee: fixed, quoted per project
For whom
Owners and developers with a site and a line in mind.
You receive
Profile analysis, speed simulation for the lightest and heaviest rider, sag and tension estimate, written go / no-go report.
We need
Start and end points (address or GPS), terrain profile or survey, anchor options, rider weight range.
Stage 3

Concept & Preliminary Design

Lead time: Agreed per project
Fee: fixed, quoted per project
For whom
Lines that passed feasibility and need a design for investors or the permit.
You receive
Concept and sketch round with your approval, 3D layout and preliminary design of the line, towers and platforms.
We need
Feasibility outcome, site plan, capacity target.
Stage 3 · Module 3B

Engineering & Construction Book

Lead time: About 8–12 weeks per product
Fee: fixed, quoted per project
For whom
Approved designs that are ready to be built.
You receive
Calculations to the Eurocodes, construction drawings, hardware list and Construction Book.
We need
Approved preliminary design and geotechnical data.
Stage 4

Certification Support

Lead time: Alongside Module 3B
Fee: fixed, quoted per project
For whom
Every line that needs an independent inspection before opening.
You receive
Coordination with TÜV or your national inspection body and the technical file.
We need
Name of your inspection body and local requirements.

Ready to check your line? Request a zipline feasibility study or read more about zipline design & engineering.

Quotes and fees

How quoting works

We do not give free calculations or ballpark prices. We give you a clear scope and a fixed fee for the package that fits, so the numbers you receive are worth something.

1
Send your project details

Use the project form or the zipline form. The more we know about the site and your plans, the sharper the scope.

2
Introductory call

A free call of 30–45 minutes to understand the project and agree which package fits.

3
Written quote

We send the scope, the result and a fixed fee. No work starts until you accept it.

4
Delivery

We deliver the agreed result, and you decide on the next step.

Credited back when you buildIf the project goes ahead and we build it, the fee for the feasibility study is credited against the construction contract. You pay for the study once, not twice.
Frequently asked questions

What does a feasibility study for an adventure park cover?

It tests whether the site can carry the park you have in mind: the buildable area, the attraction mix and capacity against your visitor targets, phasing, and indicative investment and return on your own assumptions. It ends with a clear finding: proceed, proceed with conditions, or stop.

How much does a feasibility study cost?

The fee is fixed and quoted per project, because the scope depends on the size of the site and the project. If we build the project, the feasibility fee is credited against the construction contract.

Do I have to take every package?

No. You start where your project is. Some clients start with a feasibility study; others come with an approved concept and need engineering and certification support only.

How long does a study take?

A zipline feasibility study takes 5–10 working days after you accept the quote and we have the site data. Park and resort studies are planned per project, starting with the site visit.

✓ Adventure park builder since 2005✓ Designed to EN 15567✓ 500+ installations in 40+ countries✓ Offices in Ede, Amsterdam, Dubai and Riyadh

Ready for the first step?

Tell us about your site and your plans. We advise on the package that fits and send a fixed-fee quote before any work starts.