• 1.jpg
  • 2.jpg
  • 3.jpg
  • 4.jpg
  • 5.jpg
  • 6.jpg
  • 7.jpg
  • 042A8449-LowRes.jpg
  • inclusive-climbing.jpg
  • JULY-24-071.jpg
  • JULY-24-079.jpg
  • RVR_zipline-06.jpg
◆ Zipline Equipment · Explainer

zipBACK: the automatic zip line return system for short lines

On a short zip line, the ride takes seconds, but getting the trolley back to the start can take much longer. In family entertainment centres and trampoline parks, that walk back is what limits the number of rides per hour. The zipBACK solves exactly that one job: it brings the empty trolley back to the start by itself.

Rider on a short indoor zip line in a family entertainment centre
Short answerzipBACK is an automatic trolley return device for short zip lines up to 40 m (130 ft). After the rider unclips at the end, it pulls the trolley back to the start through a redirect rope, so staff do not have to walk it back. It is not a brake and not a safety device: the line still needs its own braking and its own inspection.
Zip line return systemMini zip linesFEC & trampoline parks
Return systems

What does a zip line return system do?

Every zip line has to get its trolley back to the start before the next rider can go. There are four common ways to do that. Which one fits depends on the length of the line and the number of riders per hour.

MethodHow it worksBest suited to
Manual pull-backStaff pull the trolley back with a rope or walk it backLow-use lines; costs staff time on every ride
WinchA powered winch hauls the trolley back to the startLonger lines; needs power, controls and an operator
Trolley carried backRiders or staff take the trolley off and carry it to the startCommercial lines with a stock of trolleys
Automatic retraction (zipBACK)A retraction device at the start pulls the empty trolley back on a redirect ropeShort, harness-free lines up to 40 m (130 ft)
Not the same as ZipTronik or zipSTOPzipBACK only returns the empty trolley and provides no braking. A zipSTOP is an end brake that stops the rider. ZipTronik is an autonomous trolley that carries the rider back up on longer lines. Different jobs, different products.
How it works

How zipBACK works and where it fits

From launch to return

✓
Mounted at the start. The device sits at the start terminal of the line.
✓
Redirect rope to the trolley. A rope runs from the device through a 2:1 redirection to the rider trolley. The redirection is supplied and installed by the operator.
✓
Rider goes down. The rope pays out while the rider travels down the line and lands.
✓
Trolley comes back. Once the rider unclips, zipBACK pulls the trolley back to the start; according to the manufacturer this takes a couple of seconds.

Where it fits

  • Family entertainment centres and indoor play areas
  • Trampoline parks
  • Short, harness-free zip lines with soft landings
  • Lines up to 40 m (130 ft) long

Where it does not fit

  • Lines longer than 40 m (130 ft)
  • Any situation where the device would have to slow or stop the rider
SpecificationValue
Maximum line length40 m (130 ft)
Weight15 kg (33 lb)
Dimensions380 × 320 × 216 mm (15 × 12.6 × 8.5 in)
BrakingNone: the line needs its own brake
Daily operation

Operation and maintenance

zipBACK takes the walk-back out of every ride. That is where the gain in rides per hour comes from: staff stay at the start and the landing, and the trolley comes to them.

Checks and wear parts

  • Check the redirect rope, its connection to the trolley and the mounting before opening
  • Replace worn parts: the unit has field-replaceable wear parts
  • Keep the rope path clear of riders and spectators

Because zipBACK is not a safety device, the manufacturer does not require an annual recertification of the unit. The zip line itself still needs its daily checks and its annual main inspection.

Stopping the rider

The rider has to be stopped by the line's own brake or landing. How to lay that out is explained in our zipline landing zone guide. For inspection routines, see lifecycle management.

zipBACK is available in our shop: zipBACK zip line trolley return system. For the brake, see zipline braking systems.

Frequently asked questions

What is a zip line return system?

A zip line return system brings the trolley back to the start after each ride, so the next rider can go. It can be manual, a winch, or an automatic retraction device such as zipBACK.

How long can the zip line be?

zipBACK is designed for zip lines up to 40 m (130 ft) long. Longer lines need another return method.

Does zipBACK brake the rider?

No. zipBACK provides no braking. It only returns the empty trolley. The line must have its own brake or landing that stops every rider.

Does zipBACK need an annual recertification?

According to the manufacturer, no, because it is not a life-safety device. The zip line itself still needs daily checks and an annual main inspection.

Related content
Zipline design packages
From a 5–10 day feasibility study to the Construction Book and certification support. Fixed fee per package, the study fee credited back when we build.
✓ Adventure park builder since 2005✓ Ziplines designed to EN 15567✓ Annual main inspection and lifecycle support✓ Offices in Ede, Amsterdam, Dubai and Riyadh

Planning a mini zip line for your venue?

Tell us about your venue and the line you have in mind. We advise on the layout, the brake and the return system before you buy.